DUMP TRAILER Power UNIT-DOUBLE ACTING
This power unit has a electrical power up power down circuit with load holding on the two A & B ports. A pressure compensatred movement control might be extra to circuit to manage the decent speed with the cylinder.
one. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean all of the hydraulic elements concerned in advance of installation of the power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst, which need to also be clean and totally free of impurities. N46 hydraulic oil is suggested.
four. The electrical power unit needs to be mounted horizontally.
5. Check the oil level during the tank immediately after the original working of your energy unit.
six. Oil transforming is required immediately after the first a hundred operation hrs, afterwards the moment every single 3000 hours.
DUMP TRAILER Electrical power UNIT- SINGLE ACTING
This power unit includes a electrical power up gravity down circuit. Start the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Guide override to solenoid valve can be provided if demanded. Also a strain compen sated movement handle can be added for the circuit to control the descent pace of the cylinder.
Remark: Please seek advice from our income engineer for the distinctive pump displacement, motor electrical power or tank capability.
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean each of the hydraulic elements concerned ahead of set up of the electrical power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst,which need to also be clean and free of impurities.N46 hydraulic oil is encouraged.
4. The energy unit should be mounted horizontally.
5. Check the oil degree from the tank soon after the initial running of the power unit.
6. Oil transforming is needed just after the first 100 operation hrs, afterwards once every 3000 hours.