worm motor
A robust worm-drive gearbox powered by an MM28 motor. Ideal applications where a simple to match, high torque output is required. Great for student based tasks which includes robots and buggies.
The unit has been designed to ensure that the output shaft can be ‘clicked’ in and out for modification. Electronic.g. reducing to size. The motor is snap fitted into its cradle to engage the apparatus and worm.
Tiedot
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + electric motor: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the engine is not turning. The high equipment ratios of 216:1 or 336:1 make this gearbox appropriate for little walking robots, lifting mechanisms, and various other applications where great torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draft to a few amps, making them ideal candidates for the DRV8833 motor driver carrier. Motor overheating can be due to excessive stalling, also at very low voltages. We advise that you utilize stall-detection sensors, or just watch your robot, to ensure that it doesn\u2019t stall for lots of seconds at the same time.
This gearbox has a 4 mm diameter, round output shaft, which works together with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also matches on the smaller threaded end of the shaft, though it is not particularly designed to work with this type of shaft (the hub\u2019s set screw could harm the thread on the shaft).
Ever-Power gear motors happen to be economical, right-angle, worm-geared motors that install easily found in the tightest applications. Economical right angle worm geared motors arranged new criteria for reliability, effectiveness and economy with unparalleled features including hollow shafts in the tiniest sizes. An inverter friendly style offers easy integration right now and a future proof remedy. The Ever-Power gear electric motor offers total versatility in mounting options includes shaft, base, encounter, and flange alternatives. The motor terminal box could be mounted in alternate positions rotated in 90\u00ba steps around the motor frame offering for unparalleled integration possibilities.
Ever-Power gear motors comply with North American and International standards, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a genuine total alternative for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose proof,and can be used outdoors or in wet and dusty conditions without the utilization of additional enclosures. Complete rated output is offered by the output shaft of the machine.
Tuotteen ominaisuudet
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50\/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Additional features:
Connecting with Plug connectors.
With built-in inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the solution for applications requiring a good part turn, optional dual output, or perhaps an inability for the motor to be back again driven. The DC correct angle gear motors are made for continuous and intermittent duty operation. Our right angle gear reducers are designed with many mounting plate options, making them perfect for a number of DC engine based applications. You can expect 12 ratios which range from 5:1 to 100:1.
10309
FEATURES
1\/43 to 3\/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ time (varies by application)
EP Products Worm Gear Motors are made to generate high torque in a small package size. Worm Equipment Motors are excellent for applications that want a self- locking or breaking characteristic since the result shaft can\u2019t rotate when there\u2019s no power used. Also, Worm Gearheads can transfer
![](\"http:\/\/gearboxes-worm.xyz\/wp-content\/uploads\/2020\/03\/worm-motor.jpg\")
motion in 90 degrees. With various reduction ratios, precision minimize gears, voltages and sizes, EP Products includes a DC Worm Equipment Motor solution for your application.Ominaisuudet ja edut
Very High Torque Capabilities
Self-Locking \/ Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Gear Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Security Door Locks \/ Industrial Conveying Systems \/ Security Gates \/ Dental care Seats \/ Ambulance Cots & Stretchers Many of our DC Motors could be complimented with one of our Worm Gearheads. EP Items will continue to work with you to design and manufacture a Worm Gear Electric motor that will optimize the overall performance of your unique application.
Built to your unique requirements
Motor Type: Brushed \/ Brushless \/ Coreless
J\u00e4nnite
L\u00e4ht\u00f6nopeus
Voima
Current
Torque
V\u00e4hennyssuhde
Shaft Material & Size
Vaihteiden materiaali
Shaft Configuration: (D Lower \/ Round \/ Splined \/ Other)
General Size Parameters (L, W, H)
Encoder Type: Optical \/ Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm engine runs on the metal gear box for strength and a high torque output. Because of the special mechanical structure of the worm get the motor output shaft can be self locking and can not be rotated.
This part uses a two wire connection and supports direction control and also PWM speed control. Ranked voltage is 12v and will obtain 40RPM, with a torque of 8kg\/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg\/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear products from EP DRIVESYSTEMS especially display their power in applications where superior gear ratios are necessary. Our worm geared motors will be as a result optimally suited for make use of in intralogistics, packaging technology and the meals & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a high overload capacity
Maintenance Friendly
Washdown versions allow simple and effective cleaning of the travel system.
Korroosionestosuojaus
The NSD tupH sealed surface area conversion is exceptionally chemical, corrosion and abrasion resistant.
Flexibility
Our modular design give users optimum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are numerous applications that require drive systems, and each of these has its unique requirements. The EP series worm gear motors can be quickly and effectively adapted to satisfy your needs.
Worm gear models impress with their large power density and small design. If required, we are able to also supply them with the impressive nsd tupH surface treatment.
As well as the basic EP casing, you can expect an extensive line of bolt-on elements to customize the merchandise including torque arms, shaft covers and output flanges. These could be easily field set up, but we may also be pleased to assemble the individual components for you.
Find out more about the modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm gear unit SMI
SMI worm gear products feature a smooth, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface conversion makes the product preferably suited for severe and challenging industries like food processing and pharmaceuticals.
Adaptable input designs such as for example NEMA, IEC or direct motor mounts in extra foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared motor program. The units have on all sides several repairing possibilities and enable an easy assembling for the customer.
Other drive configurationscan be created by use of built-about components (e.g. torque arm and output flanges). The housings are created in light weight structure out of aluminium die cast. Motor attachment is realised in general by means of IEC adapter B5 or B14A.
Tekniset tiedot
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly\/installation:uniblock, flange, torque arm
Buy Worm Get Gearbox with Electric motor – incorporating the next features: 1 to 6V voltage rating, 17100 rpm simply no load velocity, 220g-cm stall torque, 3mm shaft size, 60mm long, 35mm extensive, 40mm high, a good robust worm get gearbox powered by an MM28 electric motor (included), most ideal for applications where an easy to match, high torque result is required, nylon housing and equipment, requires light oil or perhaps silicon grease lubrication, ideal for student based tasks including robots and buggies.
Most ideal for applications where an easy to fit, high torque productivity is required
Perfect for student based tasks including robots and buggies
Reversible Substantial torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Reversible Large torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Ominaisuudet:
The electric motor is Gear DC engine with micro-turbine worm, you can transform the wiring-connection to improve motor rotation.
Turbo worm geared engine with self-lock, that is, regarding motor without electrical, the outcome axis is fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole engine output shaft relatively-short than general gear electric motor, widely used to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r\/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the windows, door, Mini winch. Ect.
In sumo robot or combat robot competition where excessive holding torque’s engine is essential in order to avoid your robot being pushed by your opponent robot. The worm gear is definitely a much better option when compared to spur gear motor. How come worm gear so unique? Check this wiki out: Worm Travel.
“Unlike with ordinary equipment trains, the direction of transmission (insight shaft vs result shaft) is not reversible when working with large reduction ratios, due to the greater friction involved between the worm and worm-wheel, when usually a single start (a single spiral) worm can be used. This can be an advantage when it is desired to remove any likelihood of the output driving the input.”
In other words, it is difficult to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g<\/p>\n