Highest put on resistance obtainable by sealing grease concerning pins and bushings
The durability of chain is dramatically enhanced given that grease is sealed among the pins and bushings by O-rings. The O-ring chain is definitely the most dependable model on the Greatest Existence Chain Series with its outstanding put on resistance even in the conditions or environments the place chain servicing is difficult.
Advisable employs.
?Situations where frequent chain substitute is required on account of put on stretch
?Conditions in which lubrication through the services is extremely hard
?In an natural environment with a great deal soil, sand, dust, etc.
?Applications that need power increased than that of the sintered bushing roller chain
Other features
?Lowering noise. (The noise level is 3 dB lower in contrast to typical roller chains.)
?Reducing vibration using the friction created by O-Ring. (The electrical power reduction because of the friction is nearly negligible, because the frictional force among the pins and bushings is for normally from the applications.)
Selection of chains
The power of an O-ring chain is nearly the exact same as that of the typical roller chain. (Because the pins are longer than people of common roller chain, the average rupture strength is somewhat reduced.)
For picking out an appropriate chain, refer to “Selection of Chains” .
Once the support ambient temperature is higher than 80° C, exclusive heat resistant O-rings need to be employed. In this case, get hold of us for more details.
Connecting back links and offset hyperlinks
Two sorts of connecting hyperlinks can be found: clearance match and interference match. When large power or sturdiness is needed, use interference-fit connecting link. Only 2POJ is obtainable as the offset link for all sizes.
Sprockets
O-ring chain uses longer pins than a normal roller chain. When working with multiplex O-ring chain, the typical sprocket for multiplex chains cannot be utilized.
Caution
O-ring chain just isn’t proposed in applications in which solvents or other substances may attack “Nitric Rubber”. Distinctive material O-rings can also be offered for these situations: Please consult us for facts. Usually, “Nitric Rubber” is broken by contact with all the following chemical resources.