3 Backlash Levels, only 3 arc-min
IP65 environment protection
Motor adaptors for any servo electric motor, 50w through 5kW
24 hour delivery
he Circulute 3000 Reducer is EP’s next generation cycloidal velocity reducer. It utilizes 52100 grade bearing steel on all of its speed decrease components. It is offered with a full two year guarantee, not limited by hours of procedure, and can endure abuse that could break one’s teeth of ordinary speed reducers.
The EP 3000, readily available with inputs for both servo and induction motors, includes a compact style with single reduction ratios of 11:1 to 71:1 at 95% operating efficiency. Provided in two backlash ratings and multiple mounting choices, the EP 3000 has a design hard enough for both servo and standard induction engine applications. The initial two piece pin housing design guarantees result shaft backlash ratings of less than 6 arc-min.
The EP provides a solution for ultra-high precision, obtaining accuracies up to 20 arc-seconds. The EP allows an application to reach negligible backlash, maintain exceptional rigidity, and increase control stability so that the required output motion can be easily achieved. The look is truly a unique concept, utilizing a full contact screw-like transmission for high performance and elimination of wear. The unit provides optimum compactness using orthogonal axes and contains a big hollow shaft for flexibility.

WORM SERVO GEAR REDUCER
Функции
Wide variety of servo gearboxes, made to fit almost all servo motors found on the market
Designed for the highest torsional stiffness and the cheapest angular backlash, to get the utmost torque and overhung loads
Bush with slots and hub clamp for servomotor coupling
Benefits
Enhanced dimensional compactness due to direct servomotor coupling
Widest range of feasible servomotors coupling dimensions.
The correct technical solution thanks to a comprehensive range of sizes, gear stages, transmission ratios, designs and nonstandard designs.
Catalogs:
Servo gear reducers (worm, coaxial, helical and bevel helical models) Catalog SR
Operating instructions:
Operating instructions for gear reducers and gearmotors (UTD.045)
EP Drive Systems, Inc. is very happy to announce the growth of our selection of Servo Reducers, right now offering five degrees of precision to meet up any app requirements. The five levels of precision available allows a machine designer to select the mandatory reducer precision to meet up their needs and their budget. They are available in both in-series and right-angle versions, in torques up to 7,376 lb.ft. and ratios to 3,392:1.
Standard applications for these reducers include rotary & linear axis drives, and materials handling axis drives. Industries served include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
The installation faces of the HT, HP, E and B versions are identical, which makes it possible to interchange a unit with an increased or lower accuracy unit if needed.
A wide range of engine couplings and installation flanges are available for the complete reducer range to attach virtually any servo motor and the hollow bore output can be used to mount output shafts, pinion shafts, or other drive components.
These reducers are usually selected predicated on the peak cycle forces, which often happen during accelerations and decelerations. These cycle forces depend on the driven load, the quickness vs. period profile for the routine, and any other exterior forces acting on the axis. For more selection info, please follow this PDF hyperlink.
For application & selection assistance, please call, fax or email us. Your application info will be examined by our engineers, who will recommend the best solution for the application.
EP Inc. offers a full range of modular servo gearboxes /worm reducers. The modular style allows for configurations with motor insight flange and output pinion for rack and pinion drives, and also solid result shafts, Hollow bore output, and insight shafts for all the positioning applications. The modular style allows for universal installation of the gearbox in any orientation.
They can be utilized on motors with a NEMA23 standard flange through an adaptor kit. As the gears are normally angled, they result in a short total amount of the electric motor and its gear.
The series can also be delivered both right- and left-angled and with output shafts on both sides. A 30-mm machine recess for centering and a 4 M5 threaded mounting hole may also be built on the gear’s output side.
Built with a straightforward and robust style, the series has gearing ratios that range from 6:1 to 75:1. An individual can also customize the materials through the order, so as to match the gear to its intended app.
The Precision Planetary Gears of the EPRG series contains a thorough selection of low backlash planetary gearboxes, with up to class 3′ precision, obtainable in several gear frame sizes, with single or multiple stage reduction (for gear ratios from 1:3 to 1 1:1,000). These models also include versions with dual shaft, right position shaft and right angle output, in addition to a full selection of adapters for electric motor mounting, making them with the capacity of meeting the requirements of also the most diverse applications. They are created for use with integrated servo and stepper EP motors, mounted straight or via adaptor flanges, but may also be used with other EP electric motor types. This selection of products is based on years of experience and represents the outcome of a decade-long research targeted at improving performance.
Optimum precision and dynamics, combined with outstanding torque density, are the key requirements specific for reliable servo gearboxes in practice. EP provides servo gearboxes for any app and any overall performance range. Our low-backlash planetary and right-position gearboxes reflect our interest for creativity and the highest levels of precision.
Worm equipment reducers provide market enhance solution with efficiency and flexibility. Low number of basic models can be applied to a wide range of power ratings guaranteeing best performance and decrease ratios from 5 to 1000.
Gear reducers and servo gearboxes of EP Precision Machinery Co., Ltd. are designed for high-performance mechanical gear. When the motor velocity needs to be reduced, the result torque improves and send torque completely to the application. We believe that customers will appreciate our gear reducer to accomplish their demand. Just go to EP, you will get more information about servo gearheads, servo gearboxes, and gear reducers. We always keep in the years ahead for your support.
Plug the Speed Reducer in to the desired channel of your receiver, and connect the lead from your servo (or servo wye) in to the man servo lead coming from the circuit board. The set screw on the blue trim pot, located close to the top of the main circuit board, can be used to control the acceleration of the servo. Change the set screw fully clockwise (CW) for regular servo speed with no speed reduction, fully counter-clockwise (CCW) for optimum speed reduction, or anywhere in between for partial rate reduction. The red LED indicates three possible conditions: Gradual Blinking = No Transmission; Solid On = No Rate Decrease; Fast Blinking = Reduced Swiftness Setting
Please note that if you make any alter to the speed setting as the receiver is on, you must cycle power to the receiver (turn if off and back on) for the brand new speed setting to take effect. This circuit may also be used in conjunction with this Servo Reverser to trigger flap or retract servos to carefully turn in opposing directions for correct function. Instructions are included for easy set up and use.
IMPORTANT NOTE: This product will only focus on a regular, proportional servo. You won’t work on a retract-type servo, because they do not identify any servo positions other than clockwise (CW) and counter-clockwise (CCW). Retract servos can’t be slowed down, even by a transmitter which includes this function, as their design and electronics do not allow it. Examine the FAQ page for more information.
This device will reduce the speed of any regular, proportional servo. Connect it in the middle of your receiver and the servo (or servos) you intend to control for a more scale-like motion of flaps or retracts. Adjustable, it can be set to lessen the velocity of your servo from super-slow motion to no speed reduction at all, with an almost infinite amount of positions in between. Maximum reduction period for a servo to visit 90 degrees is about 14 seconds, minimum time (no reduction) is merely the normal rate of the servo. Great for reducing or removing the inclination of a plane to “balloon up” when flaps are deployed. It can be used to control more than one servo by use of a normal servo Y.
This is the new regulated version that can be utilized on radio systems powered by any size or type of battery, including 4.8-6.0 volt 4-5 cell Ni-Cad/Ni-MH batteries, and HV (high voltage) receivers that are powered by 2-cell 6.6-8.4 volt Li-Po/Li-Ion/Existence batteries. This unit will NOT reduce the voltage going to your servos.
The EP Gear Reducer may be the perfect solution for servomotor applications such as packaging machines, gantries, injection molding machines, pick and place, and linear slides.Provided in concentric shaft, correct position solid shaft, and right angle hollow shaft styles with modular adaptor flanges and keyless compressible bushings to quickly mount to any kind of manufacturer’s servo motor. The EP Series helical gears have slanted teeth compared to spur gears with directly cut teeth, making a smoother gear mesh, yielding significantly lower noise levels.
The low backlash EP planetary servo gear units are made for the 30 to 350 Nm (265 to 3100 lb-in) torque classes. They were designed to combine the greatest possible versatility and cost-efficiency because not every application requires high-performance components.
They offer a basis for diverse, dynamic and cost-optimized drive solutions.
The EP planetary servo gear units can be found in the following versions:
PSC = B5 output, soft output shaft
PSKC = B5 result, with keyway
PSCZ = B14, result, smooth output shaft
PSKCZ = B14 output, with keyway

Share this article if you understand somebody that could also be interested in servo gear reducer.