Ever-Power Transmission
Global Leader in Agricultural Drivetrain Solutions
Heavy-Duty Auger Drive Gearbox for Grain Combine Harvesters
Engineered for the UK’s High-Moisture Harvest Conditions.
When the pressure is on to unload 12 tons of winter wheat in under 90 seconds, your combine’s unloading system is the critical bottleneck. Ever-Power’s replacement Auger Drive Gearboxes are designed to withstand the shock loads of wet, heavy straw and high-yielding crops common in East Anglia and the Scottish Borders.
Technical Data Sheet: Series AP-900 Auger Drive
Derived from our global engineering database, specific to high-torque auger applications.
| Parameter | Spesifikasi | Parameter | Spesifikasi |
|---|---|---|---|
| Rated Torque (Continuous) | 850 Nm | Kecepatan Masukan (Maks) | 1000 RPM |
| Peak Torque (Shock) | 1.450 Nm | Perbandingan | 1:1.35 or 1:1.92 |
| Thermal Rating (20°C ambient) | 45 kW | Profil Poros Masukan | 1 3/8″ Z6 DIN 9611 |
| Profil Poros Keluaran | Splined 1 3/4″ Z20 | Bahan Perumahan | Besi Cor Ulet QT450-10 |
| Bahan Gigi | 20CrMnTiH (Karburisasi) | Kekerasan Gigi | 58-62 HRC |
| Jenis Pelumasan | Oil Bath (SAE 90 EP) | Kapasitas Minyak | 1,2 Liter |
| Jenis Bantalan | Tapered Roller (Timken/SKF) | Jenis Segel | Pelindung Debu dan NBR Bibir Ganda |
| Kisaran Suhu Operasional | -20°C hingga +85°C | Tingkat Kebisingan | < 78 dB pada jarak 1 m |
| Efisiensi | ≥ 96% | Reaksi | 0,15 – 0,25 mm |
| Pola Pemasangan | 4x M16 on 140mm PCD | Berat (Kering) | 38.5 kg |
| Lapisan Cat | Epoxy Powder Coat (Black/Grey) | Ketahanan Korosi | Salt Spray Test > 500 hrs |
| Faktor Layanan | 1.5 (AGMA Class II) | Rotasi Masukan | CW or CCW Reversible |
| Shaft Seal Material | FKM (Viton) Optional | Sumbat Ventilasi | Filter Sinter Kuningan |
| Ambang Getaran | < 4,5 mm/s RMS | Umur Kelelahan (L10) | > 12.000 Jam |
| Sertifikasi | ISO 9001:2015, CE | Jaminan | 18 Bulan |
Mechanism: The Heart of the Unloading System
Itu Auger Drive Gearbox is the pivotal transmission unit located at the base of the vertical unloading auger inside the grain tank or at the junction of the turret auger. Its primary function is to convert the high-speed input from the combine’s main drive (typically via a belt or chain drive) into high-torque rotation required to lift grain vertically.
Operational Logic:
- 1. Input Stage: Power enters via a 90-degree bevel gear set, changing the axis of rotation from horizontal to vertical.
- 2. Perkalian Torsi: The gear ratio (e.g., 1.92:1) reduces speed but nearly doubles the torque, providing the “break-out” force needed when the auger is fully submerged in wet wheat.
- 3. Load Bearing: Unlike standard gearboxes, this unit houses heavy-duty thrust bearings to support the immense axial load of the auger screw pushing down against the grain column.
[UK] Extreme Operating Conditions Field Study
Wilayah: Lincolnshire & Yorkshire Wolds | Tanaman: Winter Wheat & Oilseed Rape
The United Kingdom presents a unique metallurgical challenge for agricultural gearboxes. Unlike the dry harvests of Australia or the US Midwest, UK farmers often harvest grain at 18-22% moisture content to beat the autumn rains.
The “Wet Grain” Torque Factor:
- Wet grain has a higher coefficient of friction against the auger flighting, increasing the torque requirement by up to 35% compared to dry grain (13% moisture).
- Standard OEM gearboxes often suffer from premature thermal overload or “pitting” on the ring gear teeth due to this sustained high-load cycling.
- Solusi Ever-Power: We use an optimized gear tooth profile with increased contact area and a higher grade gear oil (fully synthetic 75W-90) recommendation for UK clients to maintain viscosity under these high-friction conditions.
Performance Benchmarking: OEM vs. Ever-Power Pro
| Fitur | Standard Aftermarket Brand | Ever-Power Heavy Duty |
|---|---|---|
| Bahan Gigi | 20CrMnTi (Standard) | 20CrMnTiH + Shot Peening |
| Sistem Penyegelan | NBR Bibir Tunggal | Triple Lip FKM (Viton) + Cassette Seal |
| Toleransi Reaksi Negatif | 0.30 – 0.40 mm | 0.15 – 0.20 mm (Precision Lapped) |
| Warranty (UK) | 12 Bulan | 18 Bulan / 2 Musim Panen |
Disclaimer: Ever-Power gearboxes are aftermarket replacement parts. References to OEM names (Claas, John Deere, New Holland, Massey Ferguson, Case IH) are for compatibility identification purposes only and do not imply endorsement by the original equipment manufacturers.
> FROM THE CHIEF ENGINEER’S DESK
“Designing a gearbox for a combine harvester isn’t just about torque ratings; it’s about surviving the ‘dust storm’. In 2019, we analyzed returned units from Suffolk and noticed a recurring failure mode: microscopic chaff dust was bypassing the input seal, turning the oil into an abrasive paste. This wasn’t a gear failure; it was a seal failure.
Consequently, for our UK-spec AP-900 series, we introduced a labyrinth shield over the main seal. This non-contact barrier flings dust away via centrifugal force before it ever touches the rubber lip. Since this iteration, our seal-related warranty claims in the UK market have dropped by 92%.”
– Dr. L. Zhang, Senior Drivetrain Architect, Ever-Power
Global Case Studies: Solving the Unloading Bottleneck
🇬🇧 United Kingdom: The Wet Straw Test
Klien: Contractor in Cambridgeshire operating a Claas Lexion fleet.
Masalah: Frequent shear bolt failures on the turret auger drive during wet harvests.
Larutan: Upgraded to Ever-Power AP-900 with a reinforced output shaft. The higher shock-load capacity allowed the operator to unload at full speed even with 21% moisture wheat.
🇩🇪 Germany: High-Capacity Rye
Klien: Co-operative in Brandenburg.
Masalah Utama: Overheating gearboxes during continuous unloading on-the-go.
Larutan: We utilized a finned aluminum housing variant for better heat dissipation, reducing operating temps by 15°C.
🇨🇦 Canada: The Frozen Harvest
Klien: Farm in Saskatchewan.
Masalah: Seal cracking at -15°C late-season harvest.
Larutan: Ever-Power supplied units with Low-Temp NBR seals specifically for the North American market.
🇧🇷 Brazil: Mato Grosso Soybeans
Klien: Large-scale soybean producer.
Masalah: Heavy dust intrusion causing bearing seizure.
Larutan: Implemented our “Cassette Seal” technology which proved impervious to the fine red dust of the region.
Standar Kepatuhan & Keselamatan Regional
For our UK and European partners, compliance is non-negotiable. Ever-Power gearboxes are manufactured in strict accordance with:
- BS EN ISO 4254-7:2017: Agricultural machinery safety – Combine harvesters, forage harvesters.
- Penandaan UKCA: Fully compliant with post-Brexit UK Conformity Assessed requirements for machinery components.
- Direktif Mesin Uni Eropa 2006/42/EC: Ensuring seamless integration for OEMs exporting to the EU.
- Reach Regulation (EC) No 1907/2006: All paints and lubricants are free from restricted substances.
Pertanyaan yang Sering Diajukan
Q: How do I know if my combine’s auger gearbox needs replacing?
A: Listen for a distinctive “growling” noise when the auger is engaged but empty. Also, check for oil leaks at the vertical shaft seal or excessive play (backlash) when you manually rock the auger flighting. If the backlash exceeds 15 degrees, the gears are dangerously worn.
Q: Can Ever-Power gearboxes handle the high moisture grain we get in Scotland?
A: Absolutely. We specifically reinforce the bearings and use high-grade gear sets to handle the extra torque load generated by wet, sticky grain (up to 25% moisture). We recommend using 75W-140 synthetic oil for these colder, high-load conditions.
Q: Are your gearboxes compatible with older John Deere 20-series combines?
A: Yes, we have a specialized “Heritage Series” of gearboxes that match the mounting patterns and spline counts of older John Deere, Massey Ferguson, and Case IH Axial-Flow models, ensuring you don’t have to scrap a good machine just for a gearbox.
Q: What is the lead time for delivery to the UK?
A: For standard models, we can ship via air freight to London Heathrow or Manchester within 5-7 days. Sea freight for bulk stock orders typically takes 30-40 days to Felixstowe or Southampton.
Q: Do you supply the connecting PTO shafts for the auger drive?
A: Yes! The gearbox is only half the story. We supply matched PTO shafts, often with shear-bolt or slip-clutch protection, to ensure the transmission line is fully protected from shock loads.
Q: Is it difficult to retrofit an Ever-Power gearbox?
A: No, our units are “Drop-in Replacements”. The bolt holes, shaft heights, and spline dimensions are engineered to match the OEM specifications exactly, so no welding or drilling is required.
Q: What warranty do you offer for B2B distributors?
A: We offer an extended 18-month warranty for our B2B partners, covering manufacturing defects. We also provide a fast-track claims process where we ship replacement units immediately upon photo verification of the failure.
Q: Do you offer volume discounts for agricultural parts wholesalers?
A: Yes, we have a tiered pricing structure. Orders of 10+ units or mixed container loads of gearboxes, PTO shafts, and sprockets qualify for significant wholesale discounts.
Solusi Sistem Penggerak Lengkap
Don’t just replace the gearbox. Ensure the longevity of your entire system with Ever-Power’s integrated agricultural components.
Poros PTO
Wide-angle, shear bolt, and slip clutch protected shafts.
Rantai Penggerak
Heavy-duty roller chains (CA550, 80H) for combine elevators.
Roda Gigi
Hardened teeth sprockets for extended wear life.
Hydraulics
Cylinders and pumps compatible with unloading systems.
Ready for the Next Harvest?
Don’t let a gearbox failure cost you sunny harvest days. Stock up on Ever-Power premium replacements today.
diedit oleh gzl
