Engineered for the specific silvicultural conditions of the UK and Northern Europe. Delivering 850+ Nm of eccentric torque stability for apples, plums, and cherries.
The Kinetic Heart of the Harvest: Redefining Vibration Transmission
In the mechanized harvesting of stone fruits and nuts, the gearbox driving the energy wheel (or inertia wheel) is not merely a transmission component; it is the structural fuse of the entire system. Agricultural machinery in the United Kingdom, particularly in the cider apple orchards of Somerset and Herefordshire or the cherry operations in Kent, faces a unique set of challenges compared to the dry heat of California or the Mediterranean. The damp, often clay-heavy soils (like the brickearth in Kent) absorb vibration differently, requiring shakers to exert precise frequency control to dislodge fruit without damaging the cambium layer of the tree.
EVER-POWER’s specialized Energy Wheel Drive Gearbox is designed to bridge the gap between the hydraulic motor’s high-speed input and the massive inertial load of the eccentric weights. Unlike standard industrial gearboxes that fail under the “start-stop” shock loads typical of shaking 60-100 trees per hour, our units feature reinforced bearing housings and a specialized heat-dissipation geometry. We don’t just spin a weight; we manage the chaotic energy of the harvest, ensuring that the vibration goes into the trunk, not into shattering your output shaft.
Technical Specifications: Series TS-X7 Inertia Drive
| Categoria dei parametri | Specification A (Standard) | Specification B (Heavy Duty) |
|---|---|---|
| Rated Output Torque (T2n) | 680 Nm | 1,150 Nm |
| Carico di picco dell'urto | 1.400 Nm | 2.800 Nm |
| Rapporto di trasmissione | 1:1.92 (Speed Increaser) | 1:3.5 (Speed Increaser) |
| Velocità di ingresso (massima) | 540 giri al minuto | 1.000 giri al minuto |
| Output Speed (Shaking Freq.) | 1,036 RPM | 3.500 giri al minuto |
| Materiale per alloggi | Grey Cast Iron HT250 | Ghisa sferoidale QT450-10 |
| Materiale degli ingranaggi | 20CrMnTi (Carburized) | 20CrNiMo (Carbonitrided) |
| Durezza superficiale | 58-62 HRC | 60-64 HRC |
| Durezza del nucleo | 30-38 HRC | 35-42 HRC |
| Scanalatura dell'albero di ingresso | 1-3/8″ Z6 | SAE C 14T 12/24 DP |
| Tipo di albero di uscita | Cylindrical Keyed Ø50mm | Tapered 1:10 Heavy Duty |
| Marca dei cuscinetti | C&U / HRB | SKF / NSK / Timken |
| Tipo di cuscinetto (uscita) | Palla con scanalatura profonda | Double Row Spherical Roller |
| Lubrificazione | Oil Bath (Splash) | Forced Feed Capability |
| Capacità del petrolio | 1,2 litri | 2.5 Litres |
| Oil Viscosity Recomm. | SAE 85W-90 | ISO VG 220 Synthetic |
| Intervallo di temperatura di funzionamento | -10°C to +90°C | da -20 °C a +110 °C |
| Materiale di tenuta | NBR (Nitrile) | Labbro doppio FKM (Viton) |
| Tipo di sfiato | Standard Plug | Filtro in bronzo sinterizzato |
| Livello di rumore (a 1 m) | < 85 dB | < 82 dB |
| Protezione contro l'ingresso di agenti esterni | IP55 | IP66 (resistente alla polvere) |
| Fattore di servizio | 1.5 | 2.2 |
| Schema di montaggio | 4-Bolt Square Flange | Custom 6-Bolt Round |
| Backlash (Arc min) | 15-20 | 8-12 (Precision) |
| Verniciatura | Alkyd Enamel Blue | Epoxy Powder Coat Black |
| Classificazione termica | 18 kW | 32 kW |
| Efficienza | 96% | 97.5% |
| Peso (a secco) | 35 kg | 48 kg |
| Standard di progettazione | GB/T 19001 | AGMA 6001-E08 |
| Garanzia | 12 mesi | 24 mesi |
Anatomy of the Drive: How it Works
The Energy Wheel gearbox sits at the terminus of the shaker arm (monoboom). It accepts rotary power—either from a tractor’s PTO via a telescoping shaft or more commonly in modern UK setups, from a high-flow hydraulic motor. Its sole function is to spin a large eccentric mass (weights varying from 50kg to 200kg) to speeds often exceeding 2,000 RPM. This creates the “Hz” (frequency) required to shake the tree.
The Critical Function: It is an oscillation generator. The gearbox must withstand the radial loads created by the spinning weight, which attempts to pull the output shaft out of the housing 2,000 times a minute. This requires oversized spherical roller bearings that would be overkill in a standard rotary cutter.
Adaptation to Field Conditions
The UK “Cold-Wet” Factor: Unlike harvesting almonds in California, the UK apple and plum harvest often occurs in damp conditions with ambient temperatures ranging from 8°C to 15°C. This creates a risk of internal condensation. EVER-POWER gearboxes for this market feature a “Tropicalized” internal coating to prevent rust during the off-season storage (which is 10 months of the year).
Debris Management: Bark dust and leaf litter are fine particulates that clog standard breathers, leading to seal blowout. Our UK-spec units utilize a 10-micron sintered bronze filter vent that allows thermal expansion without ingesting particulate matter.
Market Compatibility & Advantage
Our gearboxes are engineered to serve as drop-in replacements for worn-out units on several major platforms found in European orchards. We have benchmarked our performance against standard OEM fitments.
| Caratteristica | Standard OEM Unit | EVER-POWER Enhanced Series |
|---|---|---|
| Bearing Retention | Snap Rings (Circlips) | Threaded Retainer Ring (Zero Axial Play) |
| Tipo di sigillo | NBR a labbro singolo | Dual Lip Viton + Cassette Seal |
| Progettazione di alloggi | Standard Ribbing | +35% Surface Area (Deep Fin Technology) |
[Regno Unito] Requisiti del cambio specifici per terreno e coltura
Regulatory Landscape: UKCA & PUWER
Post-Brexit, agricultural machinery components entering the GB market must adhere to UKCA (UK Conformity Assessed) standards, which mirror the essential health and safety requirements of the EU Supply of Machinery (Safety) Regulations 2008. Specifically for tree shakers, compliance with PUWER (Provision and Use of Work Equipment Regulations 1998) is critical. Our cambi come with full technical files to support your machine’s self-certification, particularly regarding noise emission and vibration containment.
Regional Application: The “Cider Belt”
In the “Cider Belt” counties of Somerset, Herefordshire, and Gloucestershire, the harvest of Dabinett and Michelin apples often involves shaking trees that are older and have thicker, more rigid trunks than modern trellis systems. This requires a gearbox capable of delivering lower frequency but higher amplitude pulses. Our Variable Mass series allows operators to adjust the eccentricity to suit both young trellis orchards in Kent and established standard orchards in the West Country without changing the gearbox.
From the Engineer’s Desk: Designing for the “Death Rattle”
By Chief Design Engineer, Dr. L. Chen (18 Years Drivetrain Experience)
“The most destructive moment for a shaker banca isn’t the shaking itself—it’s the shut-down. When the hydraulic flow cuts, the heavy eccentric wheel wants to keep spinning, but the motor acts as a brake. This creates a massive reverse torque spike, often snapping the input shaft. In our design, we implemented an overrunning clutch compatibility on the input side (optional) and, crucially, upgraded the input shaft material to 20CrNiMo with a specific case-hardening depth of 1.2mm. We keep the core tough (35 HRC) to absorb that ‘death rattle’ shock. We also moved from standard grey iron to QT450 Ductile Iron for the housing because we saw too many competitors’ mounting feet cracking under the shear forces in rocky terrains.”
Field Notes: Global Problem Solving
📍 Posizione: Herefordshire, UK | Cider Apple Farm
Il punto dolente: “Our old shaker heads were overheating by 11 AM. The oil seals would bake hard, leak, and then the gears would grind dry. We were losing 3 hours a day letting them cool down.”
Soluzione EVER-POWER: “We installed the TS-X7 High-Cooling variant with 30% more fin area and switched them to a synthetic ISO VG 220 oil. The operator reported the housing was touchable by hand even after a 6-hour shift. No more downtime.”
📍 Posizione: Andalusia, Spain | Olive Grove (Intensive)
Il punto dolente: “Vibration was cracking the gearbox casing where it mounts to the clamp. We went through three boxes in one season.”
Soluzione EVER-POWER: “We identified that the mounting surface wasn’t perfectly flat, causing stress. We supplied a Ductile Iron unit with a machined reinforcement plate. It’s been running for three seasons now with zero cracks.”
⚠️ When to Replace Your Shaker Gearbox
- ✅ Excessive Heat: If water sizzles on the casing after 30 mins of work.
- ✅ Axial Play: If you can move the output shaft in/out by more than 1mm.
- ✅ Silver Sheen in Oil: Metal flakes in the oil sight glass indicate gear face failure.
- ✅ Perdita di tenuta: Wetness around the output shaft implies the vibration has compromised the seal lip.
Soluzioni complete per la trasmissione
EVER-POWER is your one-stop shop. A gearbox is only as good as what connects to it.
Alberi di presa di forza
Wide-angle CV joints for tight turns in orchards. Essential for tractor-mounted shakers to prevent driveline chatter.
Componenti idraulici
Matching hydraulic motors (Orbital & Piston) and cylinders for the clamp mechanism.
Common Questions About Trunk Shaker Gearboxes
How much does a replacement gearbox for a Coe shaker cost in the UK?
Prices vary based on torque capacity, but generally, an aftermarket heavy-duty unit lands between £800 and £1,500. Importing OEM parts can cost double that. Request a quote from us for a precise figure delivered to your UK farm.
What oil should I use for shaker gearboxes in cold British weather?
Great question. For UK autumns, we recommend a synthetic ISO VG 150 or 220. Mineral SAE 90 can be too thick on a 5°C morning, causing starvation at startup. Synthetics flow better and protect the bearings instantly.
Can you ship these gearboxes to Norfolk or Suffolk quickly?
Yes, absolutely. We have logistics partners ensuring 5-7 day delivery to East Anglia and the rest of the UK. We understand that during harvest, every hour of downtime implies lost revenue.
Do you sell the eccentric weights along with the gearbox?
We primarily focus on the gearbox, but we can fabricate custom energy wheels if you provide the drawing. However, most customers reuse their existing weights, which fit perfectly onto our keyed or tapered output shafts.
Why does my shaker gearbox keep overheating?
It’s usually one of three things: low oil level, the wrong oil viscosity, or the bearings are preloaded too tightly. Our EVER-POWER units feature larger oil sumps to dissipate heat more effectively during continuous operation.
Is your gearbox compatible with hydraulic motor inputs?
Yes, standard inputs are SAE A or B 2-bolt mounts with splined shafts. We can adapt to Danfoss, Parker, or Eaton hydraulic motors commonly used on modern shakers.
How often should I change the oil in a trunk shaker drive?
We recommend the first change after 50 hours (break-in). After that, every season or 500 hours. Always check for metal particles which indicate early bearing wear.
Where are EVER-POWER agricultural gearboxes manufactured?
We manufacture in our state-of-the-art facility in Hangzhou, adhering to strict ISO quality standards. We supply global OEMs and have extensive experience exporting to the UK and European markets.
Ready to Secure Your Harvest Reliability?
Don’t let a broken gearbox stall your operation in the middle of the season. Contact EVER-POWER for a custom quote or cross-reference assistance.
We typically respond within 12 hours.
modifica a cura di gzl
