Engineered for the demanding torque requirements of Lincolnshire clay and Scottish stony terrain. The definitive power-splitting solution for high-efficiency mechanical weeding and soil aeration.
Engineering the Heart of Mechanical Weeding: The Central Splitter
In the realm of precision agriculture, specifically within the architecture of rigid and folding inter-row cultivators, the Central Distribution Gearbox acts as the torque command centre. Unlike simple single-output rotavator boxes, this unit must accept the PTO input (typically at 540 or 1000 RPM) and intelligently split this power laterally to secondary chain drives or side gearboxes that drive the individual cultivating elements.
For the UK market, where the transition from chemical herbicides to mechanical hoeing is accelerating due to resistance issues in black-grass (Alopecurus myosuroides), the stress on driveline components has intensified. Our EVER-POWER central gearboxes are designed to withstand the “stick-slip” shock loads characteristic of the Fens’ heavy clay and the abrasive silica dust found in East Anglian sandy loams. We don’t just transfer power; we manage the harmonic vibrations generated by multiple rotor interactions.
熱安定性
Enhanced oil sump capacity (up to 4.5L) and external cooling fins reduce operating temperatures by 15°C compared to standard cast-iron boxes, vital during intense spring cultivation windows.
衝撃荷重吸収
Utilizing 20CrMnTiH alloy steel with a specific carburizing depth of 0.8-1.2mm ensures gears survive the impact of hidden flint or limestone, common in the Cotswolds.
Technical Specifications: Model EP-CDG-750 Series
The following data reflects our standard configuration for 4-6 meter folding cultivators. OEM customization is available for specific width and torque requirements.
| パラメータカテゴリ | Specification / Standard | Value / Unit |
|---|---|---|
| Rated Power (Input) | @ 1000 RPM | 180 HP (132 kW) |
| Rated Power (Input) | @ 540 RPM | 110 HP (82 kW) |
| 最大出力トルク | 連続運転 | 2,850 Nm |
| ギア比 | Reduction / Speed-up | 1:1.35, 1:1.92, 1:1 (Configurable) |
| 入力シャフトスプライン | DIN 9611 | 1-3/4″ Z6 or 1-3/8″ Z21 |
| 出力軸タイプ | Dual Output (Through Shaft) | Hexagonal 50mm or Splined |
| ハウジング材 | ダクタイル鋳鉄 | QT450-10 (GGG40) |
| ギア素材 | Forged Alloy Steel | 20CrMnTiH |
| 熱処理 | Carburizing & Quenching | 58-62 HRC Hardness |
| 潤滑方式 | 飛沫潤滑 | EP 85W-90 / SAE 90 |
| 石油生産能力 | Reservoir Volume | 3.8リットル |
| 動作温度 | Ambient Range | -20℃～+45℃ |
| Max Oil Temp | During Operation | 95°C (Peak 110°C) |
| シーリングシステム | Double Lip with Dirt Shield | NBR or FKM (Viton) |
| ベアリング寿命（L10） | ISO 281 | 5,000時間以上 |
| ベアリングの種類 | Tapered Roller | 30209 / 32210 Series |
| 騒音レベル | @ 1 meter | < 82 dB(A) |
| 反発 | 精密グレード | 0.15～0.25mm |
| 効率 | Mechanical | ≥ 96% |
| Paint Thickness | 耐腐食性 | 120-150 microns |
| 休憩 | Pressure Release | Spring-loaded, Filtered |
| 取り付けパターン | ボルトサークル | 4x M16 @ 180mm PCD |
| 重量（乾燥重量） | Net Mass | 58 kg |
| シャフト硬度 | Surface | 50-55 HRC |
| 保護等級 | 侵入保護 | IP65 |
| 振動限界 | RMS Velocity | 4.5 mm/s未満 |
| サービス係数 | AGMA | 1.5 (Heavy Shock) |
| Oil Seal Spring | 材料 | Stainless Steel 304 |
| 保証 | 標準 | 18ヶ月 |
Drivetrain Logic in UK Agronomy
The central distribution gearbox is mounted on the main frame of the cultivator. It receives rotational energy directly from the tractor’s PTO shaft via a slip-clutch protected drive shaft. Inside the casing, a high-precision bevel gear set redirects this energy 90 degrees to a transverse shaft (or dual output shafts). This transverse shaft then powers the side transmissions (chain or gear) located at the extremities of the implement, which in turn drive the horizontal rotor shafts equipped with C-tines or L-blades.
UK Field Reality: The “Clod & Clay” Factor
Farming in the UK presents a unique spectrum of challenges compared to the dusty plains of Australia or the vast soy fields of Brazil.
- 1. The Lincolnshire “Heavy Land”: In regions like Holbeach and Spalding, the silt and clay soils possess incredibly high shear strength when wet. A standard gearbox often suffers from “case deflection” under the immense torque required to turn rotors in these sticky conditions. EVER-POWER boxes feature reinforced ribbing (Wall Thickness > 12mm) to maintain gear mesh alignment under peak load.
- 2. The Scottish Stoney Logic: In Aberdeenshire barley fields, granite stones are a constant threat. When a rotor hits a stone, the shock travels instantly back to the central gearbox. Our input shafts utilize a proprietary “Torque Dampening Profile” and are matched with shear-bolt or slip-clutch PTOs to prevent catastrophic gear tooth fracture.
- 3. The Wet Harvest Windows: UK autumns are notoriously wet. Gearbox breathers (vents) on competitor models often suck in moisture as the box cools down after work, leading to oil emulsification. EVER-POWER utilizes a specialized Sintered Bronze Breather with a hydrophobic membrane, ensuring only air passes, not water.
UK & EU Regulatory Compliance Landscape
For OEMs exporting to or manufacturing within the UK, compliance with post-Brexit standards is non-negotiable. EVER-POWER gearboxes are fully validated against:
UKCA & CE Marking
Compliant with the Supply of Machinery (Safety) Regulations 2008 and EU Machinery Directive 2006/42/EC. All rotating parts are designed to accept standard guarding (ISO 500) to prevent entanglement.
BS EN ISO 4254-1
Agricultural machinery safety – General requirements. Our gearbox housing integrity ensures containment of internal parts in the unlikely event of failure, a key safety requirement.
Engineer’s Notebook: Field Resolutions
Excerpts from our site visits across Europe, detailing real problems and our specific engineering interventions.
Case 1: The Potato Ridge Disaster (Yorkshire, UK)
クライアントの課題： “We run a 6-meter bed former. The central box overheats after 3 hours of deep ridging in heavy loam. Seals blow, oil leaks onto the crop. It’s a nightmare.” – Farm Manager, Selby.
EVER-POWER Diagnosis: The OEM gearbox had insufficient oil volume (2.2L) for the thermal load generated by the continuous high-torque demand of forming 90cm ridges.
解決： We retrofitted the EP-CDG-HighCap model with a 4.5L sump and deep-finned casing. We also switched the seals to Viton (FKM) capable of handling 200°C spikes.
結果： “Two seasons later, zero leaks. Oil temp stays steady at 85°C even on 12-hour shifts.”
Case 2: The Sugar Beet Impact (Hauts-de-France, France)
クライアントの課題： “Our inter-row weeder gearboxes are shearing shafts when we hit hidden limestone pockets near the Belgian border.”
EVER-POWER Diagnosis: Metallurgical analysis showed the competitor’s shaft core was too brittle (through-hardened). It lacked the ductility to absorb shock.
解決： Introduced a localized induction hardening process. We kept the core toughness (30-35 HRC) while maintaining surface hardness (58 HRC) on the splines.
結果： The frequency of shaft failure dropped by 95% in the following season.
Case 3: The Tulip Bulb Rotavator (Noord-Holland, Netherlands)
クライアントの課題： “Saltwater corrosion from the nearby sea air is seizing the input shafts during winter storage.”
EVER-POWER Diagnosis: Standard paint and bare metal shafts were insufficient for the saline coastal environment.
解決： Applied a specialized marine-grade epoxy primer and Zinc-Nickel plating to the exposed input shafts.
結果： Extended component lifespan by 4 years; seamless start-up after winter storage.
Case 4: The Organic Maize Weeder (Bavaria, Germany)
クライアントの課題： “We need absolute precision. The backlash in the current gearbox causes the weeding tines to lag, damaging the maize stalks.”
EVER-POWER Diagnosis: Excessive gear lash (>0.5mm) in the original generic gearbox resulted in sloppy tool engagement.
解決： Supplied our “Precision-Grade” series with ground bevel gears (DIN Quality 6) reducing backlash to <0.15mm.
結果： Crop damage reduced by 12%; yield increased significantly due to more aggressive weeding capabilities close to the plant.
Case 5: The Olive Grove Challenge (Andalusia, Spain)
クライアントの課題： “Dust. It gets everywhere. The gearbox oil turns to grinding paste within a week.”
EVER-POWER Diagnosis: Standard single-lip seals were failing against the fine, abrasive silica dust of the dry olive groves.
解決： Implemented a “Cassette Seal” system – a fully enclosed multi-lip seal that rotates within itself, providing an impenetrable barrier to dust.
結果： Maintenance intervals extended from weekly to monthly.
Market Compatibility & Brand Replacement
エバーパワー ギアボックス are engineered to be dimensionally interchangeable with major global brands, offering a cost-effective yet performance-enhanced alternative for aftermarket replacement or OEM switching.
| 特徴 | EVER-POWER EP-Series | Comer Industries (T-Series)* | Bondioli & Pavesi (S-Series)* |
|---|---|---|---|
| ギア素材 | 20CrMnTiH (Vacuum Carburized) | Standard Alloy | Standard Alloy |
| Oil Seal Spec | Double Lip + Dust Shield (Viton) | Single/Double Lip (NBR) | Double Lip (NBR) |
| Housing Wall | +15% Thickness Reinforced | 標準 | 標準 |
| Cost Index | 100% (Direct Factory) | 160% – 200% | 170% – 220% |
*Disclaimer: All manufacturer names, symbols, and descriptions (e.g., Comer, Bondioli & Pavesi, Kuhn, Maschio) are used for reference purposes only to aid in product identification and compatibility determination. EVER-POWER is an independent manufacturer and is not affiliated with these brands.
The Critical Link: PTO Shaft Integration
A gearbox is only as good as the shaft driving it. In UK cultivator applications, the angle of articulation often changes rapidly when lifting the implement at the headland.
We strongly recommend pairing our Central Distribution Gearbox with EVER-POWER’s Wide-Angle PTO Shafts (CV Joints). This combination allows for continuous power transmission even during turns, protecting the gearbox input bearings from lateral thrust loads.
- Shear Bolt Limiter: Sacrifice a £2 bolt, not a £500 gearbox.
- Slip Clutch (Friction Disc): Essential for stony ground; automatically slips when torque spikes, then re-engages.
- Profile Tubes: Lemon, Triangular, and Star profiles available to match your existing fleet.
農業部品のワンストップショップ
Why source from ten suppliers? Simplify your supply chain.
- 油圧シリンダー
- スプロケットとチェーン
- Bearings & Flanges
- Tillage Points & Blades
⚠️ Diagnostic: When to Replace Your Cultivator Gearbox
Frequently Asked Questions (B2B & Technical)
What is the lead time for a custom 200HP central gearbox delivered to the UK Midlands?
For standard configurations like our EP-CDG series, we can ship from stock within 3-5 days. For custom OEM specifications requiring new casting moulds or ratio adjustments, the typical production cycle is 35-45 days, plus sea freight (approx. 4 weeks) to Felixstowe or Southampton.
Can I replace a Comer T-312 gearbox on my Maschio rotavator with an EVER-POWER unit?
Absolutely. Our engineers have mapped the mounting patterns and shaft dimensions of the Comer T-Series. We can supply a direct “drop-in” replacement that matches the bolt circle and spline count, often with upgraded internal bearing specs for longer life in UK soil conditions.
How do I select the correct gear ratio for my PTO input speed to achieve optimal rotor RPM?
It depends on your tractor’s PTO (540 or 1000 RPM) and desired rotor speed (typically 200-260 RPM for tillage). If you input 540 RPM and need 240 RPM output, you need a reduction ratio of roughly 2.25:1. Contact our technical team with your implement width and blade type for a precise calculation.
Do you provide 3D CAD models for engineering validation before we place a bulk order?
Yes, for B2B OEM clients, we provide full STP/STEP files of our gearboxes. This allows your design team to verify fitment, clearance with the frame, and PTO shaft angles within your SolidWorks or Autodesk Inventor environment before manufacturing begins.
What is the recommended oil viscosity for operating gearboxes in Scottish winter conditions?
While SAE 90 is standard, for colder climates like Scotland or Northern England winters, we recommend a multi-grade synthetic 75W-90. This ensures the oil flows instantly at startup in sub-zero temperatures, protecting the upper bearings before splash lubrication fully engages.
Are spare parts like seal kits and bevel gear sets available for maintenance in the UK?
Yes, we support the “Right to Repair”. We supply comprehensive overhaul kits including oil seals, shims, bearings, and gaskets. We can ship these via air express (DHL/FedEx) to arrive in the UK within 48-72 hours to minimize downtime during the harvest season.
Does the gearbox come pre-filled with oil, or do we need to fill it upon installation?
For shipping safety and weight reduction, gearboxes are shipped dry (without oil). A distinct “NO OIL” warning tag is attached. You must fill the unit to the level plug with the specified gear oil (usually approx 3.5 – 4.5 liters depending on the model) before the first run.
How does your warranty policy handle failure due to stone impact shock loads?
Our standard 18-month warranty covers manufacturing defects. While direct impact damage is typically an operational hazard, our gearboxes designed with “Shear-Safe” input shafts are built to survive. If a failure occurs, we analyze the fracture mode; if it’s a material flaw, we replace it. We also advise on correct slip-clutch settings to prevent this.
Ready to Fortify Your Machinery?
Join over 150 OEM manufacturers who trust EVER-POWER for their transmission solutions. From the clay fields of Lincolnshire to the global market, we drive performance.
