Standardbeschreibung
Outfitted with all the zero leak bidirectional checking sole-noid valves, this power unit is designed for your operation of two independent circuits. Which are respectively for that principal and subordinate platforms in the double scissors lift. Two cut-off valves are employed for reducing the machine manually in situation of electrical power loss. If a lot more independent circuits are essential to your application please speak to us for availability.
Remark: 1. Please seek advice from our income engineer for your unique pump displacement, motor energy or tank capacity.
two. CSA or UL certified motors are available upon request.
Unique Notes
one. The AC motor is of S3 duty cycle, which could only do the job intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
two. Clean every one of the hydraulic parts concerned before installation of the power unit.
3. Viscosity on the oil shoud be 15~46 cst,plus the oil need to be clean and free of charge of impurities,N46 hydraulic oil is recommended.
4. The energy unit should really be mounted vertically.
5. Check the oil level while in the tank just after the initial working with the power unit.
six. Oil shifting is required immediately after the initial a hundred operation hrs,afterwards when just about every 3000 hours.